Request a call-back

Breaker Keeps Tripping in Wichita, KS?

A breaker that trips once may be protecting the circuit. A breaker that will not stay on is telling you there is a short, a ground fault, a failed breaker or a load the circuit cannot support. Resetting it over and over, or installing a larger breaker, is unsafe.

Request a call-back

This is a free referral service that connects people in Wichita with independent local licensed electricians. We are not an electrical contractor and we do not do the work ourselves.

Free referral service. We connect you with an independent local electrician and do not do the work ourselves. Calls may be recorded.

What to do right now

  1. Leave the breaker off if it has already tripped a second time.
  2. Unplug or switch off everything on that circuit, then try one reset. If it holds, add loads back one at a time.
  3. If it trips with everything unplugged, do not reset it again. Request a call-back.
  4. If the panel is hot, buzzing or smells like burning, stay away from it and request help. Call 911 if there is smoke or fire.
  5. Do not put in a larger breaker or fuse so that it stops tripping.

When this is an emergency

Smoke, fire, a downed line, or danger to life? Leave the area and call 911. For a downed power line, also call the electric utility. Do not wait on a referral call-back.

A breaker that tripped once and now holds

If you reset it once, unplugged a heavy or failed appliance, and the breaker has held, you can often wait for a scheduled visit if you want the circuit looked at. If you do not know why it tripped, or it has started happening more often, request a prompt call-back and stop using the heavy load that seems to cause it.

In Wichita

Older neighborhoods such as College Hill, Riverside, Delano and Linwood often have mid-century panels, original receptacles and fewer circuits than modern loads use.

Wichita-area panels are often in a garage, basement, utility area or an interior wall. A panel in an unheated or occasionally damp garage should be kept dry and should not be ignored if it shows rust or corrosion.

Related services

Related problems

In the Wichita area

We also refer people in these communities:

See the full service area.

See all common electrical problems in Wichita or the emergency electrician cost guide.

Common questions

Why does a breaker trip when the air conditioner or a shop tool starts?

A large motor can cause a brief current spike. Sometimes the circuit is simply undersized for that load, and sometimes a failing motor or a weak breaker is the cause. An electrician can measure it rather than guessing.

My AFCI breaker trips randomly. Is that a nuisance?

AFCI breakers are meant to trip on certain arc faults, and they can also trip for wiring problems, a failed device or, sometimes, a sensitive or failing breaker. It is worth having it checked rather than replacing it with a standard breaker.

Is it safe to keep resetting it 'just once more'?

No. One careful reset after you have unplugged loads is enough. Repeated resets can add heat at a bad connection.

Request a call-back

This is a free referral service that connects people in Wichita with independent local licensed electricians. We are not an electrical contractor and we do not do the work ourselves.